65
Select a WIFI Hot Spot to connect to and then its password request window appears. Program the
password using the Virtual Key Board and then press the ENTER key of the Virtual Key
Board. If the WIFI Hot Spot has no password, press the ENTER key of the Virtual Key Board
in the empty (blank) password request window. After that, the monitor starts to connect to the WIFI
Hot Spot selected. Refer to the pictures below.
If the connection succeeds, the SSID of the WIFI Hot Spot Access Point (AP) is changed to red
color lettering and the WIFI Status Line in the bottom right of the live view screen is changed to
WIFI ON. Unless and until the WIFI Hot Spot (AP) is no longer available in the vehicle WIFI
network; the monitor will try to automatically connect to the WIFI Hot Spot (AP) whenever the DVR
monitor is rebooted by switching on and off at the main power supply. If the wrong password is
input, and/or the WIFI Hot Spot is not stable due to location or no service in the area of a linked
mobile network (3G or LTE) etc., the below right pop up window appears. Then, after pressing the
ENTER button on the monitor or the remote control at OK of the pop up window, you can
retry to connect to the AP (WIFI Hot Spot). Refer to the pictures below.
Password Window of selected Hot Spot
Connecting to the Hot Spot selected