39
- Locate the cursor at REAR CAMERA
using ‘Screen (Up)’ & ‘Channel (Down)’ buttons of the
monitor or Cursor Control (Direction) buttons on the remote control.
- Select the desired Ca
mera Type by pressing ‘Enter’ button of the monitor or the
button of the
remote control. Press the button to make your selection.
8.
Setup
- The user can change the default values for each function on each Camera, etc. in this menu.
- Locate the cursor
at SETUP by pressing ‘Screen (Up)’ & ‘Channel (Down)’ buttons of the monitor
or Cursor Control (Direction) buttons on the remote control.
-
Press ‘Enter’ button of the monitor or the
button of the remote control and then enter the
password when the password window is displayed over the FUNCTION menu as below;
- The factory set default password is
‘
0000
’. Input the password using ‘Screen (Up)’, ‘Channel
(Down)’, ‘Volume < (Left)’, ‘Volume > (Right)’, ‘Enter’ buttons on the monitor, or the ‘Numeric’ and
the
buttons on the remote control. Follow the procedures below;
ⓐ
In case of using the buttons on the monitor;
①
Locate the cursor at KEYBOARD on the password window using
‘Volume < (Left)’,
‘Volume > (Right)’ buttons and press the ‘Enter’ button. Then a Virtual Keyboard appears
as below.