12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.IN
TEC
| relevantsolutions.com/inteccontrols
Specifications subject to change without notice. | USA 160811 | Page 11 of 34
MGC2 – UserManual
PolyGard
®
is a registered trademark of MSR-Electronic GmbH
4.4 Menu Sensor Readings
In this menu, the display shows the current value (CV), the gas type and the defined control mode (CV or AV mode) for
each active sensor point.
In the control mode Average Value (AV), both values (CV and AV) are displayed.
The SP address and the display depend on the system parameter settings for the SP addressing mode (see 4.8.3)
SP01 CO ppm
50 AV 33 CV
Symbol
Description
Setting
Status
Function
SPXX
Measured value
Measured value analog transmitter
CO
Gas type
See 4.6.2
ppm
Gas unit
See 4.6.2
CV
Current value
Current value of gas concentration
AV
Average value
Average value (10 measured values within the time unit)
*
Control mode
Display of selected control mode (CV or AV evaluation)
Not active
Status SP
SP not active
Error
Malfunction SP
Communication error, or signal out of the measuring range
Locked
SP locked
SP was temporarily locked by the operator.
