TwinLock B600 CashProtect
Operation
Manual V.1.04A
62
4.16
Service
Descriptions of the functions of menu
Service
. Also see
on page 33.
4.16.1
Reset: Loading the Factory Settings of the Terminal
Note: Loading the factory settings deletes the user- and configuration settings.
Caution
By reloading the factory settings, system specific
settings concerning hardware and user settings
will be deleted.
After booting, only the local lock master will be
capable of opening.
Save the current configuration via optional software,
before you reload the factory settings.
1.
Unlock the system (open lock 1 or all locks).
2.
With
>
and
Enter
, select
Service
.
Service | Reset
is on display.
If
Service
is not available, open the lock(s) first.
3.
Confirm with
Enter
.
Code entry | System manager
,
0123456789
, as the case may be, and
Code
are on display.
4.
Enter the system manager code.
System manager
and
Terminal
are on display.
5.
Confirm with
Enter
.
Code entry | System manager
,
0123456789
, as the case may be, and
Code
are on display.
6.
Enter the system manager code once more.
System manager | Please wait
, and, afterwards
INITIALISING | DELETING EEPROM
,
OK
,
TwinLock
and
System Setup
are on display.
7.
Confirm with
Enter
.
Language | 1 Deutsch
is on display. By pressing
Enter
confirm the
language or with key
<
or
>
select another language.
8.
With key > select English, for example, and press
Enter
.
English | Saved
, as it may be, and
System setup | New system
are on display.
9.
With key > select
Terminal change
and press
Enter
.
System setup | Terminal: 1
is on display.
10. Confirm with
Enter
.
System setup | No. locks: 1
is on display.
11. With key > select the number of locks in the system and press
Enter
.
Serial no. | Lock 1
,
Code entry
,
System manager
and
Code:
are
on display.
