TwinLock B600 CashProtect
Operation
Manual V.1.04A
51
4.13.12
Setting Up “Pairing”
The manager can set
up “Pairing”
.
Also see „
“, page
26 and the
manual TwinIP, as it may be.
With a system without network, you can set up “pairing” with
“00000000” (8 zeros) as notional serial number TwinIP.
For a possible
update to a system connected to a network, this number must be replaced
by the serial number of the unit TwinIP when setting up "Pairing" again.
Settings
real or notional (for systems without network) serial
number of TwinIP and pairing key (16 digits,
definable) available, TwinIP set up correctly, if part of the
system.
Note
Use this menu also to change the pairing key regularly.
The pairing key should be changed regularly, for example
annually, to ensure the highest level of security. The key is
changed by the customer and it should be the same for all
systems involved (TwinLock and TwinIP, for example).
1.
Unlock the system (open lock 1 or all locks).
2.
With
>
and
Enter
select
Settings
.
Settings | Manager
are on display.
3.
With
>
and
Enter
select
Manager
.
Manager | Change code
is on display.
4.
With
>
select
Pairing
and confirm with
Enter
.
Code entry | System manager | Code:
is on display.
5.
Enter the manager code.
Serial no. |
is on display.
6.
Enter the serial number of TwinIP and select
Enter
.
This number is in the "Pairing" area on the "Administration" page of the
application
„TwinIP“.
Pairing key |
is on display.
7.
Enter the 16 digit private pairing key and confirm with
Enter
.
This private key also is in the "Pairing" area on the "Administration" page of the
application
„TwinIP“.
Pairing key | Saved
is on display.
Serial number | Saved
and
Pairing| OK
are on display.
Initial master | Please wait
indicates that also the (internal) initial
master key is recalculated and stored in the locks.
You have successfully
set up “Pairing”
.
