TwinLock B600 CashProtect
Operation
Manual V.1.04A
52
4.13.13
Setting Up
“
Code Distribution
”
(not with B600)
Not with B600. With TwinNet 10.3 and higher only.
Settings
Network connection, TwinIP and pairing set up
correctly
1.
Unlock the system (open lock 1 or all locks).
2.
With
>
and
Enter
select
Settings
.
Settings | Manager
are on display.
3.
With
>
and
Enter
select
Manager
.
Manager | Change code
is on display.
4.
With
>
select
Code distribution
and confirm with
Enter
.
Code entry | System manager | Code:
is on display.
5.
Enter the manager code.
Code distribution |*=Yes *=No
is on display.
6.
With
>
and
Enter
select
*=Yes
.
With
*=No
, you can switch off “code distribution
".
Code distribution | Saved
is on display.
You have successfully set up “
Code distribution
”.
4.13.14
Selecting User Groups
Available with upgrade / special license. Define whether the users stored
at locks are assigned to two user groups and are administered separately
or whether that should not be the case. Before activating the option,
register the CIT master. See page 55.
Range of values: Yes / No, default setting: No
1.
Unlock the system by opening lock 1 or by opening all locks.
2.
With key < or key > select
Settings
and confirm with
Enter
.
3.
Confirm
Settings | Manager
with
Enter
.
Manager | Change code
is on display.
4.
Select
Manager | User groups
.
System manager | Code entry
, and
Code:
are on display.
5.
Enter the manager code.
User groups | *=Yes *=No
is on display.
6.
Select
*=Yes
in case you want to split the users into two user groups.
User groups | Saved
is on display.
You have successfully selected option „User groups“.
