INSYS GSM 4.3 I4
Functions
49
up, into the entry field “number of rings before answer”.
Activate
on the “Access Control” tab on the “CLIP Numbers” panel the
check
box “only calls from the following numbers are accepted”.
Enter the
phone numbers of the permitted
callers into the entry fields “num-
ber”.
In order to
store your settings
, click the “Send settings” button in the field on
the right.
Configuration with AT commands
In order to
enable the selective call accep-
tance
, use the command
AT**CLIP=1
In order to
disable the selective call accep-
tance
, use the command
AT**CLIP=0
In order to
display the state of the selective
call acceptance
, use the command
AT**CLIP=?
In order to
display a complete list of stored
phone numbers
for the selective call accep-
tance, use the command
AT**CLIP?
In order to
store the phone number
<nr>
to
the storage location
<n>
, use the command
AT**CLIP<n>=<nr>
In order to allow the n49941686920,
0941686920, 0049941686920 as caller, only
store 941686920 to location no. 1 for example.
AT**CLIP1=941686920
For each
variable digit in the phone number
,
an asterisk “
*
” can be entered.
To keep the last two digits variable, e.g. to al-
low callers from extensions, use two “
*
” char-
acters.
AT**CLIP1=9416869**
In order to
delete a single storage location
,
overwrite the storage location with an empty
entry after the “=” character
AT**CLIP<n>=
Summary of Contents for GSM 4.3 I4
Page 1: ...Manual INSYS GSM 4 3 I4 Dec 09 ...
Page 2: ......
Page 77: ...INSYS GSM 4 3 I4 Index 77 Usage according to the regulations 6 Voice connection 46 ...
Page 78: ......
