manualshive.com logo in svg

INSYS GSM 4.3 I4, Manual, Page: 64 / 78

Share
Download
INSYS GSM 4.3 I4 Manual Download Page 64

Functions 

INSYS GSM 4.3 I4 

 

 

64 

11.24

 

Configure Power-Up SMS 

If this function is enabled, the INSYS GSM 4.3 I4 sends an SMS after each interruption of 
the power supply for more than 5 seconds (not reset). 
The INSYS GSM 4.3 I4 adds date and time to the power-up SMS.  

Configuration with HSComm 

In order 

to configure the dispatch of a power-up SMS

, activate on the “Basic 

Settings” tab on the System Monitoring” panel the check box “Power-Up-
SMS” and enter into the entry field “Destination” the phone number, to which 
the power-up SMS is to be sent, as well as in the entry field “Message” the 
text to be sent. 

Configuration with AT commands 

In order to 

enable the power-up SMS

, use the 

command 

AT**POWER=1 

In order to 

configure the number for the 

power-up SMS

, use the command 

AT**POWERDST=<number> 

In order to 

configure the text for the power-up 

SMS

, use the command 

AT**POWERMSG=<text> 

In order to 

disable the power-up SMS

, use the 

command 

AT**POWER= 

 

Summary of Contents for GSM 4.3 I4















































































Reviews:

No comments