INSYS GSM 4.3 I4, Manual, Page: 61 / 78

INSYS GSM 4.3 I4 Functions
61
11.22 Configure Remote Configuration via SMS
You are able to send the extended INSYS AT** commands to the INSYS GSM 4.3 I4 via SMS
as well.
The commands sent via SMS will be executed as soon as the INSYS GSM 4.3 I4 is in com-
mand mode.

If selective call acceptance is enabled, commands, which are sent from mo-
bile phones with a phone number, which is not entered in the CLIP list, are
rejected.
Configuration with HSComm
In order to enable the remote configuration via SMS , activate on the “Basic
Settings” tab on the “GSM Connection” panel the check box “automatic SMS
processing”.
You can configure a password, which is queried after changing into remote
configuration mode. In order
to enable the password
, click on the “Access
Control” tab on the “Password for” panel on the “set password” button under
“remote configuration, control by SMS”. Enter the password into the “new
Password:” field and again in the “confirm Password:” field and click the “OK”
button.
In order
to change the password , click on the “Access Control” tab on the
“Password for” panel on the “set password” button under “remote configura-
tion, control by SMS”. Enter the old password into the “old Password:” field
and the new password into the “new Password:” field and again in the “con-
firm Password:” field and click the “OK” button. If you do not enter a new
password, the password will be disabled.
Configuration with AT commands
In order to enable automatic SMS processing ,
use the command
AT**SMSRX=1
In order to
enable automatic SMS processing
and keep SMS not intended for the INSYS GSM
4.3 I4 in the memory, use the command
AT**SMSRX=2
In order to
disable automatic SMS processing
,
use the command
AT**SMSRX=0
In order to set the password , use the com-
mand
Replace <newPW> with the password and with
the repetition of the password.
AT**PASSC=<newPW>,<new
PW>