INSYS GSM 4.3 I4, Manual

Page: 9 / 78

INSYS GSM 4.3 I4 Safety
9
1.5 Responsibilities of the Operator
As a matter of principle, the operator must observe the legal regulations, which are valid
in his country, concerning operation, functional test, repair and maintenance of electrical
devices.
1.6 Qualification of the Personnel
The installation, commissioning and maintenance of the product must only be per-
formed by trained expert personnel, which has been authorised by the plant operator.
The expert personnel must have read and understood this documentation and observe
the instructions.
1.7 Safety Instructions for Transport
The following instructions must be observed:

Do not expose the product to moisture during transport. Pack product ac-
cordingly.

Pack product sufficiently to protect it against shocks during transport, e.g.
using air-cushioned packing material.
Check product for possible damages, which might have been caused by improper trans-
port, before installation. Transport damages must be noted down to the shipping docu-
ments. All claims or damages must be filed immediately and before installation against
the carrier.
1.8 Safety Instructions for Electrical Installation
The electrical connection must only be made by authorised expert personnel according
to the wiring diagrams.
The notes to the electrical connection in the manual must be observed. Otherwise, the
protection category might be affected.
The safe disconnection of circuits, which are hazardous when touched, is only ensured if
the connected devices meet the requirements of VDE T.101 (Basic requirements for safe
disconnection).
The supply lines are to be routed apart from circuits, which are hazardous when touched,
or isolated additionally for a safe disconnection.