Functions and their Configuration
INSYS GSM 4.2
INSYS GSM 4.2 compact
48
Sep-06
These functions are optionally protected with a PIN (see Chap. 6.2.2). When a PIN is set,
the PIN (4 digits) has to be entered first after the connection has been established, which
is acknowledged with
ERROR
or
OK
The following commands (keys) are defined:
0*
Terminate connection
1*1
Switch output 1 to normally open
1*0
Switch output 1 to normally closed
2*1
Switch output 2 to normally open
2*0
Switch output 2 to normally closed
3*
Query of the alarm inputs: Response state input 1 – pause – state
input 2
Each command is acknowledged with
OK
first. The acoustic responses have the following
meaning:
Acoustic response
Corresponding keys
OK
low (short) high (short)
* #
ERROR low
(long)
1
Input inactive (HIGH)
high (medium long)
D
Input activated (LOW)
low (medium long)
1
The following extended responses are displayed instead of RING for activated DTMF
processing:
+CRING: VOICE
For voice/DTMF connections
+CRING: REL ASYNC
For data connections
Procedure: Activate DTMF tone processing
Note
After activating DTMF tone processing, the INSYS GSM must be re-
set (see Chap. 2.8.2).
To activate DTMF tone processing in the software HSComm, set a check mark in the
check box "Process DTMF tones" in the tab "Basic settings"
in the group "GSM connec-
tion".
Pertinent AT commands
AT**DTMF
Enable DTMF processing
AT**RESET
Device reset
6.1.3
Connection attempts
The number of connection attempts if dialing a remote terminal does not work immedi-
ately can be specified. This setting is effective for:
¾
Dispatch of messages (alarm or periodic alive SMS)
Summary of Contents for GSM 4.2 Compact
Page 1: ...Manual INSYS GSM 4 2 INSYS GSM 4 2 compact Sep 06...
Page 89: ......
