Initial Operation
INSYS GSM 4.2
INSYS GSM 4.2 compact
28
Sep-06
Initialization:
1.
LED
Connect
or LED
DCD
light up for approx. 4 seconds.
2.
After 8 more seconds the LED
Status
starts to flash for approx. 20 seconds.
When the device has successfully logged in, the following LEDs will light up:
¾
LED
Power
¾
LED
Status
¾
The LED
Signal
displays the strength of the GSM signal.
3.7
Connection Test
After this successful initial configuration, you can easily check whether your INSYS GSM
is connected with the GSM network:
Dial the number of a phone connection (e.g. your mobile phone) from the terminal win-
dow of the HSComm or from your terminal program.
Dialing a telephone
<n>
e.g.
Number of your mobile phone
ATD <n>
The ringing will indicate that the INSYS GSM is attempting to establish the connection.
Note
Make sure that your SIM card is enabled for incoming data connec-
tion if required (see Chap. 2.5.4).
Summary of Contents for GSM 4.2 Compact
Page 1: ...Manual INSYS GSM 4 2 INSYS GSM 4 2 compact Sep 06...
Page 89: ......
