INSYS Modem 56k small INT 2.0/USB 1.0
AT Command Set
June 06
69
Command
Description
AT&Z<n>
Save phone numbers
The command saves four entries permanently in the EEPROM. Each entry may consist
of up to 35 characters. The entries may be overwritten and must comply with the dial-
ing string as described in the
ATD
command.
AT&Z<n>=xxx
n
This is the number of the list entry (from 0 to 3).
xxx
This is the dialing string with the phone number.
Layout of the alarm functions and security callback:
AT&Z0=xxx
Number of the modem or fax for a simple alarm message
Service center number of the GSM provider for SMS access
AT&Z1=xxx
Enter the callback number for security callback
AT&Z2=xxx
Number of the mobile phone for simple alarm messages
AT&Z3=xxx
Number of the fax machine for collective alarm messages
<Pause>
+++
<Pause>
Change from data mode to command mode (online command mode).
1 second pause before and after the entry, no
<CR>.
After the response
OK
, an addi-
tional waiting period of 1 second for the re-entering of
AT
commands must be ob-
served.
<Pause>
****
<Pause>
Start of the remote configuration at the local modem
After the 4 escape characters
****
were entered at the local modem (1 second pause
before and after the entry, no return -
<CR>
-), the remote configuration at the remote
terminal is activated. After the response
OK
, an additional waiting period of 2 seconds
for the re-entering of AT commands must be observed.