INSYS Modem 56k small INT 2.0/USB 1.0
AT Command Set
June 06
67
Command
Description
AT+VCID=<n>
Set
CLIP
With this function, the phone number of the caller can be displayed during an incom-
ing call.
(Only for phone lines or systems that support CLIP. If you want to use the CLIP func-
tion, please ask your network provider, if your connection supports this function.
The following countries support CLIP:
Australia, Belgium, China, Denmark, Germany, Finland, Great Britain, Hong Kong, In-
dia, Ireland, Iceland, Italy, Canada, Korea, New Zealand, The Netherlands, Norway,
Austria, Sweden, Singapore, Spain, Taiwan, USA).
AT+VCID=0
Switches the CLIP function off (default).
AT+VCID=1
Switches the CLIP function on and displays the ID preformatted for
incoming calls.
AT+VCID=2
Switches the CLIP function on and displays the ID unformatted for in-
coming calls.
AT+VRID=<n>
Set last received CLIP
The command
AT+VRID
displays the CLIP of the last caller.
AT+VRID=0
Displays the ID preformatted.
AT+VRID=1
Displays the ID unformatted.
ATW<n>
Error correction messages
This command defines which details regarding the data transmission rate need to be
specified for a
CONNECT
message.
ATW0
The modem reports the baud rate between modem and PC. (default)
ATW1
During the connection setup, the modem reports the phone line speed,
the error correction protocol and the PC baud rate.
ATW2
The modem reports the phone line speed.
AT&W<n>
Save
the
configuration
The command saves the current modem configuration including the S registry in one
of the two user-defined defaults.
AT&W0
Save in user default 0
AT&W1
Save in user default 1