AT Command Set
INSYS Modem 56k small INT 2.0/USB 1.0
50
June 06
Command
Description
ATD<n>
C
ONTINUATION
‚
Dial tone delay: The modem performs a dial tone delay before it exe-
cutes the next character of the parameter string. The delay length is
defined in the S8 registry.
L
Last number re-dialing.
;
Return to the input mode after dialing. It is added to the end of the
dialing string and causes the moden to return to the entry mode when
it reaches “;” (with: message
OK
). This enables the input of
AT
com-
mands even with a receiver off-hook. The additional
AT
commands
can follow in the same input line after the “;” or they can be transmit-
ted to further input lines. The
ATH
command will abort the connection
and the receiver is hung up.
S=n
Dialing the n-th number from the number pool, which was set up with
the
AT&Z<n>
command.
!
If the character ”!” is a part of the dialing string, the modem will hang
up within the time frame determined in S29 and then goes off-hook
again.
^
Suppresses the sending of a ringing tone.
ATD12345;
The semicolon (
;
) causes the return to the input mode after dialing.
Default:
Ringing tone is sent for fax operation. No ringing tone for data opera-
tion.
(
)
Are ignored: They are just used as an outline.
-
Are ignored: They are just used as an outline.
‚ ‚
Space characters are ignored: They are just used as an outline.
Examples:
ATD12345
Dial the phone number 12345
ATDP12345
Dial the phone number 12345 with the pulse dialing method
ATDT12345
Dial the phone number 12345 with the tone dialing method
ATX3D0W12345
For PBXs, which connect to the exchange line using the prefix 0 (or 9):
First, blind dialing is activated by:
X3
(see the command
„
ATX3
“
) to
be able to dial a leading 0 without hearing a dialing tone.
After 0 has
been dialed via:
D0
dialing tone recognition can be switched on again
using the parameter:
W
.
The modem thus waits for the dialing tone
and continues with the rest of the dial-up (via: 12345) only after hear-
ing the dialing tone. Waiting for the dialing tone may be omitted. In
this case, the dialing command is
ATX3D012345
.