Initial Operation
INSYS Modem 56k small INT 2.0/USB 1.0
12
June 06
4.5
Installation of a USB Driver
(Only for INSYS Modem 56k small INT USB 1.0)
The installation of the INSYS modem 56k small INT USB 1.0 is performed in three steps.
During the first two installation steps, a virtual COM port is installed, through which a
modem can be addressed via a terminal program or the configuration software
HSComm.
During the third step, a modem driver can be installed, which can address the INSYS Mo-
dem 56 k small INT USB 1.0 at the just installed COM port.
The following describes the installation of the driver using the operating system Win-
dows XP. The installation of the driver using Windows 2000 is slightly different, but in
general very similar.
Note: The installation of the driver files creates a
virtual serial interface (COM port) on the com-
puter. The PC will treat this interface like a
"real" serial interface. All commands and func-
tions in this manual which relate to serial inter-
faces can also be used for the version INSYS Mo-
dem 56k small INT USB 1.0.
4.5.1
COM port installation
When connecting the modem, the following dialog is displayed:
Click on "Next"...