AT Command Set
INSYS Modem 56k small INT 2.0/USB 1.0
56
June 06
Command
Description
AT+MR=<n>
Show modulation type
The command “
AT+MR
“ enables the display of the modulation type after the message
CONNECT.
AT+MR=0
Switches the display function OFF (default).
AT+MR=1
Switches the display function ON. The displayed value applies to the
sent data.
AT+MR=2
Switches the display function ON. The displayed value applies to the
received data.
If the display function is switched on the modem will display the modulation type and
the line speed after the message
CONNECT
. After the message
CONNECT
, the line
„
+MCR:
” appears, “ followed by the modulation type (see command
AT+MS
) and the
line “+
MRR:
”, followed by the line speed.
The
AT+MR
command is useful for a connection check.
AT+MS=<Modula
tion>,
[Auto-
mode],
[Send
Minbaud,
Send
Maxbaud],
[Re-
ceive
Minbaud,
Receive
Max-
baud]
Select modulation type
AT+MS
determines the modulation type. The command enables or disables automatic
modulation recognition and defines the highest and lowest possible connection speed.
The command has the format
AT+MS=<Modulation>,
[Automode],
[Send
Min-
baud,
Send
Maxbaud],
[Receive
Minbaud,
Receive
Maxbaud]
AT+MS?
Shows the current setting
AT+MS=?
Displays a list of possible parameters
Default factory setting:
INSYS Modem 56k small INT
V92
