Quick Installation Guide
INSYS MoRoS Modem / ISDN / GPRS
© INSYS MICROELECTRONICS GmbH
Phone:
+49 (0) 941 / 56 00 61
Page 1 / 2
E-Mail: [email protected]
Status
08/2007
Internet:
www.insys-tec.de
Subject to technical changes; errors excepted
A Connecting
MoRoS
1.
Apply a supply voltage of 10-60 VDC to screw termination
2.
Connect MoRoS and configuration PC by an Ethernet cable
B LAN Settings (PC)
If a DHCP client is active on the PC (“Obtain IP address automatically”) continue with item C.
3.
Select your
LAN connection
over START
Æ
Settings
Æ
Control Panel
Æ
Network
connection
4.
Select
Properties
of the LAN connection
(Button or right mouse button)
5.
Select
Internet protocol (TCP/IP)
and
Properties
6.
Enter IP address
IP adress:
192 . 168 . 1 . 2
Subnet mask:
255 . 255 . 255 . 0
Please remember the IP settings before changing in order to restore them later.
C Access To MoRoS By Web Browser
7.
Open browser (e.g. Internet Explorer, Mozilla Firefox)
8.
Enter IP address 192.168.1.1
9.
Login with factory settings (user name: insys, password: moros)
10.
Select menu
Basic Settings – Webinterfeace
11.
Enter a new user name and passoword for the web interface (reauthentication required)
Operation: Press
OK
button to hand over data to MoRoS
