On/Off Switch
Yes
Beeper Yes,
configurable
Battery Charging LED
Yes, Embedded (shines red through case during charge)
RF Range
50’ Line-of-Sight
Retains all settings without power
Yes, all saved in Non-volatile EEPROM
Mechanical
Color
White
Plastic
UV Stabilized ABS
Dimensions
2.6" H x 1.3" W x 0.39" D
Weight 1
Oz.
Button Style
Plastic Paddles over Contact Switches
Wall Mount
Tabletop Stand
Optional Hardware
Visor Clip
Operating Environment
Indoors, 32°F to 104°F, up to 85% relative humidity
Electrical
Battery type
3.7 VDC Lithium Polymer, Rechargeable, non-replaceable
Battery life (between charges)
9-12 months under standard usage
Battery Re-charging cycles
> 500 recharging cycles
Recharging jack
Standard, Micro-USB, 5VDC
Recharging time
1 hour
Troubleshooting
Problem
Possible Cause
Solution
RemoteLinc 2 may be out of range of
nearest dual-band INSTEON device
(hopper)
Try moving an access point or other dual-band
plug-in module closer to RemoteLinc 2
The INSTEON signal may not be
getting to the “vicinity” of Responder
Make sure phases are bridged, add additional
INSTEON devices and/or move around existing
INSTEON devices
Large appliances, such as refrigerators
or air conditioners, may be producing
electrical noise on the power line
RemoteLinc 2 won’t add a
scene responder
Other electrical devices, such as
computers, televisions, or power strips,
may be absorbing the INSTEON signal
Install a power line noise filter (e.g., #1626-10) to
filter electrical noise and minimize signal attenuation
RemoteLinc 2 will not turn
a Responder On (it may
turn it off)
Ramp Rate may be Extremely Slow
Or
Responder may be Linked at OFF
Re-link to Responder with fast Ramp Rate
Page 13 of 15 2444A2xx4 Rev: 10/24/2011 10:50 AM