ADEMCO 6162RF Keypad / Transceiver –
User Guide
Alphanumeric Addressable Keypad/Transceivers for use with
Honeywell Control Panels; incorporates functions of an RF
Receiver and a 5800 Transmitter module.
= READY to Arm
= NOT READY to Arm
= System ARMED
= System NOT ARMED
Arming Keys
6162RF
: 4-Line Alpha Display
Custom Zone Designators
6162RF-KEYPAD-LBLD-UG-07-19-13_1
The Function Keys can be programmed
for special functions or panic alarm
activations. See the Function Keys
section and check with the system
installer for more information.
Programmable Function Keys
Sounder
SETTINGS KEY FUNCTION
Press
Displays Settings Menu
(options details below):
1 Set Time/Date
2 View Event Log
3 Reboot Keypad
4 Set User Code**
1. Add a User
2. Delete a User
3. Assign Attr.
Note: For Commercial controls, some of the steps are different than described
below. Refer to the system User Guide for details on setting these options.
SETTINGS KEY OPTIONS
Set Time/ Date
1. Press
and then
to select ‘Set Time/Date’.
2. Enter
the
Master User Code at the ‘Enter Your Code’ prompt and press
.
3. Press
to edit the time and date:
•
Use the number keys to change the time and date shown
•
= PM,
= AM;
•
The navigation keys to move the cursor:
= forward,
= back.
•
When
done,
press
to save and exit.
**
The menu-based user code
programming feature is only
available with certain
systems. Check with the
system installer for details on
features of your system.
