INSTEON LampLinc Dimmer User’s Guide
Page 6 of 21
HOW TO SET UP LAMPLINC DIMMER
Linking LampLinc Dimmer to an INSTEON Controller
1. Select your INSTEON Controller from the list below and follow the method shown to put it into
Linking Mode
.
A.
SwitchLinc
™
Dimmer
– Press and hold SwitchLinc Dimmer’s
Paddle Top
for 10 seconds, then release. To confirm that it is in Linking Mode,
SwitchLinc Dimmer will flash the light that it is wired to once and begin
blinking the top LED in its LED Bar.
B.
ControLinc
™
Tabletop Controller
– Choose the ON/OFF Button Pair you
want to use for controlling LampLinc Dimmer. Press and hold the
ON
Button
of the pair for 10 seconds. To confirm that it is in Linking Mode,
ControLinc’s Status LED will begin blinking.
C.
KeypadLinc
™
– Choose the ON Button you want to use for controlling
LampLinc Dimmer. Press and hold the
ON Button
for 10 seconds. To
confirm that it is in Linking Mode, KeypadLinc will flash the light that it is
wired to once and begin blinking the ON Button that you pushed.
D.
Other INSTEON Controllers
– See the INSTEON Controller’s User’s
Guide.
2. Press and hold the black
SET Button
on LampLinc Dimmer for 3 seconds. Both the lamp you are
controlling and LampLinc Dimmer’s Status LED will blink to confirm linking. Depending on the
INSTEON Controller, you have about 4 minutes to perform this step before Linking Mode times out
automatically.
