INSTEON 2864-222 User Manual Download Page 91

Page: 91 / 92

Other Features

Motion Detection

Alarm via E-Mail, upload alarm snapshot to FTP

Privacy Zone

Set privacy zone manually

User Accounts

Three levels user role

Firewall

Supports IP Filtering

Storage

Micro SD card and local storage

Reset

Reset button is available

Power

Power Supply

DC 5V/2.0A

Power Consumption

7.5 Watts (Max.)

Physical

Dimension(LxWxH)

110(L)*103(W)*127(H) mm

Gross Weight

680g

Net Weight

310g

Environment

Operating Temperature

-20° ~ 55°C (-4°F ~ 131°F)

Operating Humidity

20% ~ 85% non-condensing

Storage Temperature

-20°C ~ 60° (-4°F ~ 140°F)

Storage Humidity

0% ~ 90% non-condensing

Certification

CE, FCC, RoHS

Attention:

Power adapter should be used between 0

℃

-40

℃

, and 5%-90% relative humidity.

6.4 CE & FCC

Electromagnetic Compatibility (EMC)
FCC Statement

This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions.



This device may not cause harmful interference, and



This device must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the installation

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is like to cause harmful interference, in which case the user will be required to correct the interference at

his own expense.

FCC Caution

Any changes or modification not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.

CE Mark Warning

Summary of Contents for 2864-222





























































































Search results

Summary of Contents for 2864-222

Reviews:

Related manuals for 2864-222

Brands by name

Popular brands

INSTEON 2864-222, User Manual

Search results

Summary of Contents for 2864-222

Reviews:

Related manuals for 2864-222

Brands by name

Popular brands