63
63
5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
Step 04: Select the alarm indicator
When the motion has been detected, the alarm status will turn to Detect alarm.
Figure 4.46
There are four alarm indicators:
A Camera Sound
and
PC Sound
If the camera has connected with a speaker or other audio output device, if you select Camera Sound or PC
Sound, when the motion has been detected, the people around the camera will hear beep alarm sound.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first.
C Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as
a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in
Video->Snapshot settings panel.
Capture interval:
The interval time between two pictures.
D Recording
(except for FC1403P)
If you select this checkbox, when the motion has been detected, the camera will record automatically and store
the record files to the SD Card. Make sure the camera has inserted SD card and you have set the SD card as
the Alarm record files storage path, please go to
Record
—> Storage location
page to verify this settings.
The default alarm record time is 30s and pre-alarm record time is 5s, please go to
Record
—> Alarm Record
page and change the alarm time settings.
Step 05: Set detect area