Icon Appliance Adapter User’s Guide
Page 7 of 15
Creating an INSTEON Scene
INSTEON Scenes let you activate dramatic lighting moods with the press of just one button. INSTEON
Scenes are very easy to set up – just link more than one INSTEON module to an ON/OFF Button Pair on
an INSTEON Controller. Then, when you press either the ON or the OFF Button on the INSTEON
Controller, all of the INSTEON modules linked in the scene will respond as a group. You can link multiple
ICON Appliance Adapters or other INSTEON modules to multiple INSTEON Controllers.
To add an additional ICON Appliance Adapter to a scene controlled by an ON/OFF Button Pair on an
INSTEON Controller, simply follow the same procedure that you used for linking the first ICON Appliance
Adapter. See
Linking ICON Appliance Adapter to an INSTEON Controller
, above. To remove an ICON
Appliance Adapter from a scene, see
Unlinking ICON Appliance Adapter from an INSTEON Controller
.
TIP
With some INSTEON Controllers, you can avoid having to hold a button down for 10 seconds for each
setup step by placing the Controller in
Scene Setup Mode
, also called
Multilink Mode
. Refer to your
INSTEON Controller’s User’s Guide for detailed instructions on how to set it to Scene Setup Mode.
The following will work for a Icon
™
Tabletop Controller.
1. Set the Icon Tabletop Controller to Scene Setup Mode for the ON/OFF Button Pair you want to
use for controlling the scene by pressing and holding the
ON Button
of the pair for 10 seconds,
then tapping the same
ON Button
again
. Icon Tabletop Controller’s Status LED will blink slowly.
2. Press and hold the black
SET Button
on Icon Appliance Adapter for 3 seconds. The module’s
Status LED will blink to confirm linking. Icon Tabletop Controller will beep to confirm linking, and
its Status LED will continue to blink slowly.
3. Continue Steps 2 and 3 for any additional INSTEON modules you want to link to the scene.
4. When you are finished linking INSTEON modules to the desired ON/OFF Button, complete Scene
Setup by pressing the
ON Button
. Icon Tabletop Controller’s Status LED will stop blinking and
remain steadily on. You have about 4 minutes of inactivity before Scene Setup Mode times out
automatically.