27
Installation instructions & user guide
T210042 InstaTap office manual v1.01 June 2022
SECTION 9 Maintenance
• Turn OFF the power supply to the UCB and UCC appliances.
• Turn OFF the (mains water supply) isolation valve on the install rail.
• Remove the old filter (see above).
• Be aware that some water may drip from the filter head.
• Remove the sanitary cap from the new filter, do not touch the connector .
• Moisten the new filter connector with clean tap water.
• Insert the new filter (see above).
• Flush the filter, see page 28.
• Reset the filter monitor, see page 30.
Insert
Remove
1
2
1
2
9.1 Replace ,flush and reset the filter
9.1.1 Replace the FL500 filter
Not changing the filter cartridge when required may affect the
water quality.
Sanitisation should be carried out at all filter changes, or at
intervals of no more than 12 months.
!
Use instructions supplied with the filter cartridge.
