26
Installation instructions & user guide
T210042 InstaTap office manual v1.01 June 2022
• Don’t take finger off, until desired volume is
dispensed.
• Press the bottom dispense button to save the
measured volume (the appliance will switch
OFF).
• Switch the appliance on again using the ON/OFF
button on the front panel of the UCB.
• The set volume has now been programmed.
8.6 Set up the fixed volume dispense
SECTION 8 Operation
• This function is useful when the cup/teapot being filled is always the same
size/capacity.
!!
!
ON/OFF
• To change from on-demand dispense (default) to set
volume dispense :
• Switch off under counter boiler (UCB) using ON/OFF
button.
• Switch OFF mains power supply and wait 10 seconds.
• Switch back ON and at the same time, press & hold the
bottom dispense button (on the tap) for 5 seconds.
• The tank will either start to fill with
water or the dispense button will
begin to flash (depending on water
level in tank).
• Screen flashes alternate red white
• Release the dispense button.
• The display will show the ready screen
(unless tank is filling).
• Press the relevant fixed volume dispense button, & hold until filled with
the desired volume).
NOT
READY
o
C
HEATING
NOT
READY
o
C
HEATING
70
o
C
SOFT
MEDIUM HARD
CHANGE FILTER
Pr
READY
o
C
96
CAUTION
HOT WATER
NOT
READY
o
C
96
CHECK
WATER
!
!
CHANGE FILTER
NOT
READY
OF
!
!
READY
CHECK
WATER
!
!
READY
!
!
CLEAN
PROBES
READY
MEDIUM
!
!
NOT
READY
o
C
!
CHECK
WATER
READY
o
C
96
CAUTION
HOT WATER
