instagrid ONE max, User Manual

Page: 3 / 18

© 2022 instagrid All rights reserved
EN
3
B.3 – Rules for handling the instagrid ONE max safely
• Under no circumstances may the instagrid ONE max be opened. In particular, the “end
caps” [2 | 6] must not be opened. Maintenance and repair may only be performed by a
trained specialist.
• Control elements and plug and socket devices of the instagrid ONE max must not be
modified. Replacement may only be performed by a trained specialist.
• The outlets [4 | 9] of the instagrid ONE max must not be short-circuited.
• The electrical contacts [4 | 8 | 9] of the instagrid ONE max must not be touched with
fingers, tools or other objects.
• The instagrid ONE max must not be used as a base for working on or as a makeshift
workbench.
• The housing [10] of the instagrid ONE max must not be submerged in water or mud.
• The instagrid ONE max must only be used within the operating limits specified in [section
2.2] .
• In the event of battery fire, the fire must be extinguished with water. If possible, the
instagrid ONE max must be completely covered in water. The fire brigade must be called
and notified that lithium-ion batteries are burning.
• Vapours can escape if the instagrid ONE max is damaged or used improperly. The vapours
can irritate the respiratory tract. In this case, fresh air must be supplied and, in the event of
complaints, a doctor must be sought.
• If used incorrectly, fluid can escape from the batteries of the instagrid ONE max. In the
event of skin contact, the fluid must be washed off with water.
• If the fluid comes into contact with the eyes, also seek medical attention. Leaking battery
fluid may lead to skin irritation or burns.
• The instagrid ONE max must not be stored in temperatures above 65°C and must be kept
away from external heat sources (e.g. long solar radiation, radiant heaters, fire). Contact
with ambient air must not be restricted (e.g. through operation in a sealed container).
• The instagrid ONE max must neither be used nor stored in an area at risk of explosion.
• The instagrid ONE max must not be moved using cranes, lifting aids or other lifting
equipment.
• In order to prevent injury from the instagrid ONE max falling over or falling down, the
stable positioning of the instagrid ONE max must also be ensured when in operation
with connected loads. To this end, easy access to the connected instagrid ONE max and
adequate cable length must be ensured. Connected cables must not be placed under strain.
• Damage caused by falling down must be prevented.
Therefore, stable positioning on a non-slip floor
must be provided, and protrusions over the edge of
the floor must be avoided. The instagrid ONE max
must be secured against falling.
• In all cases, the instagrid ONE max must be checked for damage after a fall. In the event
of external damage, the instagrid ONE max must no longer be used. Exceptions to this
are damage to the frame [7] or the carry handle [1] . In the case of all other damage,
TRANSPORT mode (see [section 5.2.4] ) must be activated by turning the rotary switch [3]
to

. The customer service department must be contacted immediately, see [section 10] .
• Damage caused by the accidental falling of objects onto the instagrid ONE max or the
shipping box must be prevented. In all cases, the instagrid ONE max must be checked for
damaged parts following such impacts. In the event of external damage, the instagrid ONE
max must no longer be used. Exceptions to this are damage to the frame [7] or the carry
handle [1] . In the case of all other damage, TRANSPORT mode (see [section 5.2.4] ) must be
activated by turning the rotary switch [3] to

. The customer service department must be
contacted immediately, see [section 10] .