instagrid ONE max, User Manual

Page: 16 / 18

© 2022 instagrid All rights reserved
EN
16
8. MISCELLANEOUS
8.1 Storage
Before storage, activate TRANSPORT mode [section 5.2.4] by moving the rotary switch [3] to
the

position and remove connected cables and/or loads.
Do not store the instagrid ONE max for long periods of time in a discharged state. This could
lead to a deep discharge of the instagrid ONE max and necessitate recommissioning by
instagrid.
In order to prevent a deep discharge of the starter battery [section 5.3.1] during long-term
storage, it is advisable to fully charge the instagrid ONE max prior to storage and then to leave
it connected to the mains for another four hours in TRANSPORT mode.
Charge the instagrid ONE max at least every 12 months.
For a long service life, store the instagrid ONE max at temperatures of between 0°C and 23°C
in an atmosphere with low humidity.
8.2 Transport and shipping
"Transport" refers to any change of location of the instagrid ONE max, including shipping.
Observe the additional notes on transport in our transport instructions, of which you can find
the latest version on our website: https://instagrid.co/manuals .
The integrated Li-Ion batteries are subject to the requirements of hazardous goods legislation.
Relevant national and international regulations must be complied with.
Before transport, activate TRANSPORT mode [section 5.2.4] by moving the rotary
switch [3] to the

position and remove connected cables and/or loads.
Make sure that the operating state of the instagrid ONE max does not change during transport.
The instagrid ONE max may only be transported in an undamaged condition. Additional rules of
the shipping service provider must be heeded.
If a return shipment is necessary due to a defect or a malfunction, contact instagrid; see
[section 10] .
8.3 Cleaning and care
Before cleaning, activate TRANSPORT mode [section 5.2.4] by moving the rotary
switch [3] to the

position and remove connected cables and/or loads.
Close the socket covers [8 | 9] .
Check the instagrid ONE max for damage.
Wet cleaning of the instagrid ONE max is permitted. However, when doing this, you must
ensure that no water jets are used; in particular, the use of pressure washers is not permitted.
The use of solvents or other strongly reactive chemicals is not permitted.