manualshive.com logo in svg

Inspur NX8840, Manual, Page: 9 / 46

Share
Download
Inspur NX8840 Manual Download Page 9

Content

 

Chapter One NX8840 Computer Blade Overview

 ..................................................1

1.1 NX8840 Computer Blade Technical Speci

fi

 cation .......................................1

1.2 NX8840 Computer Blade View ....................................................................1

1.3 NX8840 Computer Blade Unit Interface and Indicator Introduction ...........1

1.4 Usage of NX8840 Computer Blade ..............................................................2

1.5 Jumper Setting ...............................................................................................2

Chapter Two System BIOS

 .......................................................................................5

2.1 How to Enter the BIOS Setup .......................................................................5

2.2 BIOS System Menu Introduction ..................................................................5

Chapter Three Operation System Installation

 ........................................................18

3.1 Manual Installation of Windows Server 2008 R2 .........................................18

3.2 Manual Installation of Red Hat Enterprise Linux 6.2 ...................................23

Chapter Four Integrated RAID System

 ...................................................................28

4.1 How to Enter SATA RAID Con

fi

 guration Interface ......................................28

4.2 Application of Control Keys .........................................................................28

4.3 SATA RAID Con

fi

 guration ...........................................................................28

Chapter Five Common Problems and Troubleshooting

 .........................................32

5.1 Restart the machine .......................................................................................32

5.2 Failure occurs when starting the machine .....................................................32

5.3 Other notices .................................................................................................35

5.4 Technical support information.......................................................................36

Summary of Contents for NX8840















































Reviews:

No comments