3
Chapter One NX8840 Computer Blade Overview
Figure 1-3 Jumper Setting Illustration
Open upper panel of the chassis
To modify mainboard jumper, please open upper panel of the chassis, under
authorization of Inspur Group Co., Ltd. Opening methods are as follows:
1. Shut down the system, pull out blade module, and press unlock spring;
2. Push outwards according to directions shown by arrows, remove upper cover of
the chassis.
Figure 1-4 Open Chassis Upper Cover Illustration
Clear CMOS Jumper Introduction
pin
jumper cap
setting
Select 1-2 pin(s) for
short circuit
Summary of Contents for NX8840
Page 10: ......