13
Chapter Two System BIOS
●
Restore AC Power Loss
Power status setting after system powered off.[Power 0ff] indicates a shutdown
status, which needs to start up manually; [Last State] indicates a power-off status; [Power
On] indicates an automatic startup status.
●
SCU device
This option is used to enable or disable SAS controller, and there’re two options
of [Enabled] and [Disabled].
To connect SAS hard disk, it is required to set this option to [Enabled].
●
Onboard SATA RAID Oprom
This option is used to enable or disable integrated SAS RAID controller rom, and
there’re two options of [Enabled] and [Disabled].
When SATA mode is set to ‘raid mode’, it is required to set this option to [Enabled].
●
USB Con
fi
guration
Controls USB enable/disable.
2.2.3.3 ME Subsystem
This menu is used to display related information about ME subsystem. It contains
information such as BIOS interface version information, version, FW status and FW
error codes etc.
2.2.4 Server Mgmt Menu
Figure 2-7
Summary of Contents for NX8840
Page 10: ......