27
Chapter Three Operation System Installation
terminal window occurred:
2. Enter /mnt directory to run installation script, to complete drive installation
automatically
/mnt/mlnxofedinstall
(1) Input “mst start” in terminal window after drive installation
Starting MST (Mellanox Software Tools) driver set
Loading MST PCI module - Success
Loading MST PCI con
fi
guration module - Success
Create devices
MST modules:
------------
MST PCI module loaded
MST PCI con
fi
guration module loaded
If the above information is displayed, it indicates to load drive normally
(2) Input “mst status”
MST devices:
------------
/dev/mst/mt4099_pciconf0
- PCI con
fi
guration cycles access.
bus:dev.fn=02:00.0 addr.reg=88 data.reg=92
Chip revision is: 01
/dev/mst/mt4099_pci_cr0
- PCI direct access.
bus:dev.fn=02:00.0 bar=0xdfb00000 size=0x100000
Chip revision is: 01
If the above information is displayed, it indicates HCA device is recognized
normally and could be used
3. Driver program uninstall
Execute /mnt/uninstall.sh, system prompts “Do you want to continue? [y/n]”,
input “y” to
fi
nish driver program uninstall automatically.
Summary of Contents for NX8840
Page 10: ......