2
Chapter One NX8840 Computer Blade Overview
Figure 1-2 Blade Unit Interface and Indicator
Number
Name
Status/Function
A
Blade KVM Status Indicator/
KVM Button
Lights on when blade KVM is activated, blue/manual
activates current blade module KVM
B
Start Button/Power Indicator
Lights on when switch blade module/blade operates
normally and
fl
ashes when starts BMC, green
C
Restart Button/Failure Indicator Lights on when blade module restarts/blade fails, red
D
USB Interface
Connects USB devices
1.4 Usage of NX8840 Computer Blade
NX8840 computer blade shall use with Inspur I800 server, and computer blade
could only be used when installed in I8000 server system, about how to install NX8840
blade onto an I8000 server, please refer to related parts in I8000 server use manual or
illustration on chassis of I8000 blade server host, which is not repeated here.
1.5 Jumper Setting
Mainboard jumper setting is an operation to short circuit two pins of the jumper to
change interface functions, according to the following
fi
gure, so as to adjust mainboard
functions.
Summary of Contents for NX8840
Page 10: ......