manualshive.com logo in svg

Inspur NF8260M5, User Manual

The Inspur NF8260M5 User Manual is a comprehensive guide that provides detailed instructions and essential information for operating and maintaining your NF8260M5 server. Download this manual for free from our website, ensuring you have the necessary knowledge to maximize the performance of your product.

Share
Download
background image

 169

BMC Settings 

Intel ME firmware is packaged with BIOS firmware as a single firmware image.

Support two upgrade modes: “BIOS+ME” and “BIOS Only”.

Power off the system before performing BIOS firmware update.

After BIOS firmware update, BIOS NVRAM will be cleared, all BIOS configurations will be

reset to defaults. 

If we update both BIOS and ME images, in order to make ME firmware take effort, it is

suggested to start the server after AC power off. 

Step 1

Login Management Web GUI, enter “Administrator -> BIOS Firmware Update”, as shown 
below. Select BIOS+ME or BIOS only, BIOS+ME by default. If you want to preserve BIOS 
setup options, users need select “BIOS Setup Options”. PHY MAC is selected to be preserved 
by default. Click “Enter Firmware Update Mode” button to enter update mode.

Figure 8-5

5

 BIOS Update Step 1

Step 2
Select image file, and click Upload button to upload file. ME will enter recovery mode, and 

then BMC will verify the image. Verify:

Size should be 32M.
Verify image integrity, it will make sure this is BIOS image.
If the verification fails, BMC will stop flash and change ME to normal mode. 

If the verification succeeds, click “Proceed to Update” button to start update. Wait for about 

3mins, then the flash is complete, and ME will enter the normal mode.

Summary of Contents for NF8260M5














































































































































































































Reviews:

No comments

Related manuals for NF8260M5

NEC Univerge SV9300 Programming Manual preview
Univerge SV9300
Brand: NEC Pages: 47
NEC Univerge SV9100 Manual preview
Univerge SV9100
Brand: NEC Pages: 766
IBM N Series Installation And Configuration Instructions preview
N Series
Brand: IBM Pages: 7
Gateway 7250R Rack Mounting Instructions preview
7250R
Brand: Gateway Pages: 26
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
Buffalo LPV4-U2-300S Quick Setup Manual preview
LPV4-U2-300S
Brand: Buffalo Pages: 2
Atop ABLELink GW21W User Manual preview
ABLELink GW21W
Brand: Atop Pages: 52
Olive Olive OPUS N5 User Manual preview
Olive OPUS N5
Brand: Olive Pages: 24
Emerson Dixell XWEB300 Installation Manual preview
Dixell XWEB300
Brand: Emerson Pages: 23
Emerson DIXELL XWEB5000 PRO Installing And Operating Instructions preview
DIXELL XWEB5000 PRO
Brand: Emerson Pages: 20
Emerson CPC ISIS Installation And Configuration Manual preview
CPC ISIS
Brand: Emerson Pages: 18
Emerson Avocent ACS 6000 User Manual preview
Avocent ACS 6000
Brand: Emerson Pages: 93
Emerson Dixell XWEB300 Operation Manual preview
Dixell XWEB300
Brand: Emerson Pages: 114
Emerson Centellis 2000 Shelf Release 3.0 Manual preview
Centellis 2000 Shelf Release 3.0
Brand: Emerson Pages: 194
Emerson ATCA-7368 Installation And Use Manual preview
ATCA-7368
Brand: Emerson Pages: 222
Medialon MAS Pro Dante User'S Reference Manual preview
MAS Pro Dante
Brand: Medialon Pages: 88
XtendLan DVR-471 User Manual preview
DVR-471
Brand: XtendLan Pages: 27
Polycom KIRK 300 Installation And Configuration Manual preview
KIRK 300
Brand: Polycom Pages: 60

Brands by name

Popular brands

Load more brands