29
Hardware Options Installation
6.4 Hard Drive Option
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components,
minimize the amount of time the access panel is open.
1.
Check the status of the hard drive from the hot-plug hard drive LED.
2.
Back up all server data on the hard drive.
3.
Remove the hard drive.
Step 1: Press the drive panel button.
Step 2: The lever on the drive tray pops out automatically. Remove the drive tray outward in
horizontal direction.
Step 3: Use four screws to fix the drive into the tray.
