30
Step 4: Install the drive tray into the chassis, and lock the lever firmly.
6.5 Power Supply Option
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
1.
Access the product rear panel.
2.
Install the power supply into the power supply bay.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the power supply
or power supply blank to cool before touching it.
3.
Connect the power cord to the power supply.
4.
Route the power cord through the power cord anchor or cable management arm.
5.
Reposition the cable management arm into the operating position.
6.
Connect the power cord to the power source.
7.
Verify that the corresponding power supply LED is green.
6.6 Air Baffle Option
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components,
minimize the amount of time the access panel is open.
1.
Power down the server.
2.
Extend the server from the rack and place it on an antistatic bench.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the machine to cool
before touching it.
3.
Remove the access panel.
