2
fire or electric shock.
7.
Please place the system far away from the cooling plate and heat sources, and be sure
not to block the air vents.
8.
Please be sure not to scatter food or liquid in the system or on other components, and
do not use the product in humid or dusty environments.
9.
Using an incompatible battery may cause explosion. When battery replacement is
required, please consult the manufacturer first, and choose batteries of the same or
equivalent type. Do not disassemble, crush, puncture the batteries or make the external
connection point short circuit, and do not expose them in the environment over 60°C.
Never throw batteries into fire or water. Please do not attempt to open or repair the
batteries. Dispose of used batteries according to instructions. For battery recycling,
please contact the local waste recycling center.
10.
Before installing equipment into the rack, please install all front and side stabilizers on
the independent rack first. Please install the front stabilizers first, if connecting with
other racks. Please install stabilizers before installing equipment into the rack. Failure to
install the corresponding stabilizers before installing equipment into the rack may cause
the cabinet to tip over, possibly resulting in severe injury. After installing the equipment
and other components into the rack, only one component can be pulled out from the
rack through its sliding part at one time. Pulling out several components at the same
time may cause the rack to turn over, resulting in serious personal injury.
11.
A minimum of two people are required to safely move a rack. The racks are extremely
awkward and heavy, moving them without adequate, trained personnel could result in
severe injury or death.
12.
It is prohibited to directly short-circuit the copper busbar. Please do not touch the
copper busbar when the rack is powered on.
13.
This is Class A product, and may cause radio interference. In such case, users may need
to take necessary measures to mitigate the interference.
14.
The equipment is intended for installation in a Restricted Access Location.
Note:
The following considerations may help avoid the occurrence of problems that
could damage the components or cause data loss, etc.
1.
In the event of the following, please unplug the power cable plug from the power
