42
Figure 4-31 Pulling out the Drive Module
c.
Separate the drive tray and the drive:
Remove the four screws securing the drive to the drive tray anticlockwise with
a Phillips screwdriver.
Figure 4-32 Removing Screws Securing the Drive to the Drive Tray
To install the drive:
1.
Install the drive to the drive tray.
a.
Orient the drive to the drive tray with the drive connector facing the rear
end of the tray.
b.
Tighten the four screws securing the drive to the drive tray clockwise with a
Phillips screwdriver.
2.
Insert the drive module into the drive bay with the lever in the open position.