38
4.4.9
Hot-swap 2.5/3.5-inch Drive Replacement
For proper cooling, do not operate the server without the access panel, air ducts,
expansion slot covers, or blanks installed. If the server supports hot-swap
components, minimize the amount of time the access panel is open.
1.
Front Panel (24 × 3.5-inch Drive)
To remove the drive:
1.
Press the blue latches on both sides of the drawer inward. The drawer handles
pop up. Hold the handles with both hands to slide the drawer out.
Figure 4-24 Pulling out the Drive Drawer
2.
Push the latch as indicated by the silkscreen arrow. The drive tray handle pops
up. Hold the handle to remove the drive module from the drawer.