22
4.4
Disassembly/Reassembly Process
During installation or removal of any hardware, always ensure all data is
backed up properly.
Disconnect the server and all attached devices from their electrical outlets.
There is no need to remove power from the server when replacing hot-swap
components.
If more than one option is to be installed, read the installation instructions
for all the hardware options and identify similar steps to streamline the
installation process.
Item appearance may be different on actual models.
4.4.1
Access Panel Replacement
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching.
For proper cooling, do not operate the server without the access panel, air
duct, or fans installed.
If the server supports hot-swap components, minimize the amount of time
the access panel is open.
To remove the access panel:
1.
Loosen the two thumbscrews on the rear of the server securing the access
panel to the server anticlockwise.
2.
Pull the access panel toward the rear of the chassis. Lift up and remove the
panel.