28
4.4.6
DIMM Replacement
Mixing use of RDIMMs and LRDIMMs is not allowed.
Mixing use of BPS is not allowed.
Mixing use of BPS with RDIMMs or LRDIMMs is allowed.
To remove the DIMM:
1.
Remove the access panel.
2.
Disconnect the cable of the super-capacitor.
3.
Remove the air duct.
4.
Locate the DIMM you want to replace.
5.
Remove the DIMM:
a.
Push the release tabs on both ends of the DIMM slot outward to unlock it.
Gently lift and remove the DIMM from the slot.
Make sure the release tabs on both ends of the DIMM slot are fully opened.
Figure 4-13 Removing the DIMM
b.
Put it into the memory box.
To install the DIMM:
1.
Take the new DIMM out from the memory box.