40
Figure 4-18 Loosening the Thumbscrew
2.
Pull out the OCP card from the server.
Figure 4-19 Pulling Out the OCP Card
3.
Put the OCP card into an antistatic bag.
To install the OCP card:
1.
Take the new OCP card out from the antistatic bag.
2.
Insert the OCP card into the card slot until it snaps into place.
3.
Tighten the thumbscrew securing the OCP card to the server clockwise.
4.4.11
E1.S Replacement
To remove the E1.S:
1.
Press the release latch to release the lever. The lever pops up automatically.
