4
c.
Discharge static electricity from your body by touching a grounded metal
object before installing, removing, or touching any electronic components
inside the device.
d.
Install and remove components gently to avoid damaging the components
or scratching your arm.
e.
Handle all the components and cards with care and do not touch the
components or contacts on the cards. Grab a card or component by
holding its edge or metal bracket.
When installing and using the cabinet:
-
After installing the cabinet, make sure the leveling feet are secured to the
rack and extended to the floor so that the full weight of the cabinet rests
on them.
-
Be sure to load the cabinet from bottom to top and install the heaviest
component first.
-
Always slide a component from the cabinet gently to keep the cabinet
balanced and stable.
-
Be careful when pressing the release latches to slide components in or out
as the rails may hurt your fingers.
-
Do not overload the AC power branch circuits in the cabinet. The total load
of the cabinet should not exceed 80% of the ratings of the branch circuits.
-
Ensure the components in the cabinet are properly ventilated.
-
Never step on other components when repairing components in the
cabinet.
