28
4.4.3
Air Duct Replacement
For proper cooling, do not operate the server without the top cover, air
ducts, expansion slot covers, or blanks installed.
If the server supports hot-swap components, minimize the amount of time
the top cover is open.
To remove the air duct:
1.
Remove the top cover.
2.
Remove the super-capacitor on the air duct.
3.
Remove the air duct in the direction of arrow.
Figure 4-5 Removing the Air Duct
To install the air duct:
1.
Lower down the air duct vertically into the chassis.
2.
Install the super-capacitor.
3.
Install the top cover.
4.4.4
Hot-Swap Fan Module Replacement
To remove the fan module:
1.
Remove the top cover.
2.
Remove the fan module:
a.
Lift up the fan module out of the fan bay.
