Inspur AGX-5 User Manual Download Page 73

Page: 73 / 170

BIOS setup

Execute Disable Bit

Execute disable bit on-off setting. Options include:

Enabled

Disabled

Enabled

Intel TXT Support

Intel trusted execution technology on-off settings. Options

include:

Enabled

Disabled

VMX

Intel virtual machine extensions technology on-off settings.

Options include:

Enabled

Disabled

Enabled

SMX

Safe mode extension on-off settings. Options include:

Enabled

Disabled

Hardware Prefetcher

Hardware prefetcher on-off settings. Options include:

Enabled

Disabled

Before CPU processing instructions or data, it will prefetch

these instructions or data from memory to L2 cache, to

shorten the amount of time that reading memory takes, to

help eliminate potential bottlenecks and to improve system

performance.

Enabled

Adjacent Cache Prefetch

Adjacent cache prefetch on-off settings. Options include:

Enabled

Disabled

If this function is enabled, during computer data reading, it will

intelligently consider the adjacent data is needed as well, and

it will prefetch these data during processing, to speed up the

reading process.

Enabled

DCU Streamer Prefetcher

DCU streamer prefetcher on-off settings. Options include:

Enabled

Disabled

This function can prefetch CPU data to shorten the data

reading time.

Enabled

DCU IP Prefectcher

DCU IP prefectcher on-off settings. Options include:

Enabled

Disabled

This function can judge whether there is data to prefetch, to

shorten the data reading time.

Enabled

LLC Prefetcher

All threads LLC prefetcher on-off settings. Options include:

Enabled

Disabled

DCU Mode

DCU mode settings. Options include:

32KB 8Way Without ECC

16KB 4Way With ECC

32KB 8Way

Without ECC

Extended APIC

Extended APIC on-off settings. Options include:

Enabled

Disabled

Enabled

AES-NI

AES instruction on-off settings. Options include:

Enabled

Disabled

This menu mainly controls whether the CPU supports AES

instruction. These instructions are mainly used for system

virtualization. Enable this instruction, system performance will

be improved.

Enabl

Summary of Contents for AGX-5











































































































































































Search results

Summary of Contents for AGX-5

Reviews:

Related manuals for AGX-5

Brands by name

Popular brands

Inspur AGX-5, User Manual

Search results

Summary of Contents for AGX-5

Reviews:

Related manuals for AGX-5

Brands by name

Popular brands