Inspur AGX-5, User Manual

Page: 47 / 170

41
BIOS setup
3. When Boot Mode is set to Legacy, a prompt “Press <CTRL-I> to enter Configuration
Utility…” will appear on the screen during system booting. Press [Ctrl] and [I] keys at the
same time to enter SATA RAID configuration, as shown in the following figure.
Fig. 2.14
3.1 After entering SATA RAID configuration interface, it will display the main menu list, the
information (disk ID, disk type, disk capacity, volume member or not) of disks connected to
SATA controller, and the existed RAID volumes information (including volume ID, name, RAID
level, capacity, status, bootable or not). There are 5 executable menus in the SATA RAID
configuration interface, as shown in the following figure.
Fig. 2.15
Key Instruction Table
Key Description
↑↓ Used to move cursor in different menus or to change values of menu options
TAB To select the next menu option
Enter To select a menu
Esc To exit menu or return to previous menu from sub-menu