15
OPERATION OF EXERCISE PROCESS
SPEED-DOWN
Will decrease the running speed.
SPEED-UP
Will increase the running speed.
INCLINE-DOWN
Will decrease the incline.
INCLINE-UP
Will increase the incline.
SPEED SHORTCUT BUTTON
Will adjust the running speed.
INCLINE SHORTCUT BUTTON
Will adjust the inclination.
STOP
Will stop the device.
GRIPPING THE HANDLE PULSE
With both hands for more than 5 seconds to
show the pulse data.
MANUAL MODE
•
Under the stand-by mode, push START key directly and the treadmill will work at the speed
1.0 km/h and incline of 0. The other windows will start counting from positive direction
(windows default). You can push SPEED+/SPEED- to change the speed or
/INCLINE- to change the incline.
•
Under the stand-by mode, push PROGRAM key to enter counting down. The TIME window
will display 15:00 and start glittering. Push SPEED+, SPEED-, , INCLINE- to set up
the required time. The possible range is: 5:00
– 99:00.
•
In the time setting model push PROGRAM key to enter the distance counting down.
DISTANCE window will display “1.0” and starts glittering. Press SPEED+, SPEED-,
, INCLINE- to set up the distance that you need. The range is: 0.5
– 99.9.
•
To set up the distance, push PROGRAM key to enter calories counting down. The CAL
window will display “50” and starts glittering. Press SPEED+, SPEED-, , INCLINE-
to set up required calorie amount. The range is: 10
– 999.
•
After you have finished all the setting, push START key to start it. The treadmill will run after 3
seconds. Push SPEED+, SPEED-, , INCLINE- to adjust the speed and the incline.
Press STOP to stop the treadmill.
INNER INSTALL PROGRAM
•
You can choose from 24 inner install programs in order: P1
– P24.
•
At the initial situation push PROGRAM key and the SPEED window displays: P1
– P24.
•
Choose required program and the TIME window starts glittering at the same time.
•
It displays the advance setting time 10:00. Press SPEED+, SPEED-, , INCLINE- to
set up the exercise time that you want. Push START to start the set program.
•
The inner install program can be divided into 10 sections. Each section time = total time (you
have set)/10.
•
During operation of each section you can push SPEED and INCLINE keys to adjust these
parameters.
•
This device will recover these parameters, that you have set, while entering next section.
•
When this device will finish one program, it makes sound B-B-B three times and stops
smoothly.
