background image

20 

 

POWER SAVE FUNCTION 

The machine is equipped with energy saving function. Under the stand-by mode, at the state of waiting 
for  operation,  it  switches  automatically  into  power  save  mode  if  there  is  no  operation  within  10 
minutes. The display will be closed. Push any button to re-wake it. 

TURN OFF 

Switch off the power. You can switch off the power to stop the treadmill not risking damage. 

WARNING: 

 

We recommend  to keep  a  slow  speed  at  the  beginning  of  your  workout  and  grasp  handrails 

until you become familiar with this device. 

 

Insert  the  safety  key  into  the  lock  and  attach  the  clip  on  the  other  side  of  the  rope  to  your 

dress. 

 

Push STOP or pull out the safety key to stop the treadmill immediately. 

EXERCISE INSTRUCTIONS 

WARM-UP PHASE 

This  stage  should  improve  your  blood  circulation  and  prepare  muscles  for  proper  working  to  reduce 
the risk of possible cramp or injury. We recommend to do a few stretching exercises as shown below. 
Each  stretching  should  be  k

ept  for  approx.  30  seconds.  Don’t  overstretch  yourself  and  don  jerk 

muscles too intensively. If you feel pain, stop immediately. 

 

Touching your toes 

Slowly  bend  your  back  from  hips.  Keep  your  back  and  arms  relaxed 
while  stretching  downwards  to  your  toes.  Do  it  as  far  as  you  are  able 
and hold the position for 15 seconds. Bend your knees slightly. 

 

Shoulder lifts 

Raise your right shoulder up towards your ear and hold for 2 seconds. 
Then repeat for your left shoulder while lowering the right. 

 

Hamstring stretched 

Sit and outstretch your right leg. Rest the sole of your left foot against 
the inside of your right tight. Stretch out your right arm along your right 
leg  as  far  as  you  can.  Hold  for  15  seconds  and  relax.  Repeat all  with 
your left leg and left arm. 

 

Side stretches 

Raise  your arms above  your head.  Stretch  your right arm towards the 
ceiling  as  far  as  possible.  Stretch  your  upper  body  towards  the  right 
side. Then repeat the exercise for the left side. 

 

Calves and Achilles tendon 

Lean against a wall with your left leg in front of the right one and your 
arms forward. Stretch out your right leg and keep  your left foot on the 
floor. Bend  your left leg and lean forwards by moving  your right hip in 
the direction of the wall. Hold for 15 seconds. Keep your leg stretched 
and repeat exercising with other leg. 

Summary of Contents for Gallop II































Reviews: