![background image](http://html1.mh-extra.com/html/insportline/gallop-ii/gallop-ii_user-manual_2069322007.webp)
7
REQUIRED TOOLS
5# Allen wrench 5 mm
1 Pc
Wrench W/SCREW Driver S=13, 14, 15
1 Pc
NOTE:
Do not connect it to power before the proper assembly has been finished.
ASSEMBLY STEPS
STEP 1
•
Open the carton and put out the above-mentioned parts.
•
Put the main frame on the ground.
STEP 2
•
Lift up the console (A) and upright tube (B) towards the arrow direction.
•
When you pull up them, make sure do not press the wires inside the upright tube. Keep touch
the upright and computer by hand to prevent falling.