16
Burned drive
Replace the drive
E06 Most common
short circuit in motor
Wires are not connected
Re-plug the wires
Motor short circuit
Exchange the motor
Motor is idle
Too low current
E08
Storage
problems
IC storage is not connected
Reconnect the memory to PIN1
IC memory has short circuit is
damaged
Replace memory
E09
Reverse error
Put treadmill at ground
Damaged drive
Replace drive
E10 Usually due to
motor instant peak,
over current
Driver has excessive torque.
Adjust the torsion potentiometer
Motor has short circuit
Replace the motor
Resistance in transmission part
Lubricate transmission part
E11
External
AC
voltage over voltage
AC Over voltage: For 220V
system, voltage higher ten
270VAC; For 110V system,
voltage higher than 150 VAC.
Stop using, ask the electrician
for help
E14
External
AC
voltage undervoltage
AC undervoltage: For 220V
system, voltage lower than
160VAC; For 110V system,
voltage lower than 70VAC
Stop using, ask the electrician
for help
EXPLODED DRAWING
Summary of Contents for FlatRun IN 18227
Page 1: ...USER MANUAL EN IN 18227 Treadmill inSPORTline FlatRun...
Page 5: ...5...